Chongqqing Rexon Oil Purification Co., Ltd
REXON as leading oil purifier manufacture, always keep researching and developing. Rexon people are hard working, conscientious, dedicated and honest. We make best efforts to offer better quality
Add to Cart
Milk Type Turbine Oil Dehydration and Recondition Purifier Machine TY-300
Our Turbine Oil Purifier can bring you below values:
→Purifying your unqualified turbine oil cleaning high efficiently
→Maintain your lube turbine oil always in good status
→Save your old oil replacement cost
→Solve your waste oil disposal problem
→Guarantee your turbines working normally with qualified oil property
→Protect your turbine machinery and plants damaged by oil pollution problems
→Reduce your oil maintenance time, energy and invest on your related machines
Application:
Rexon vacuum turbine oil purifier TY is widely used for filtering turbine lubricating oil in electric power, metallurgical, chemical engineering industries.
It is good at emulsion breaking, dehydration and removing soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment.
Features:
1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.
Advantages:
This Steam Turbine Oil Purifier Machine Equip with Vacuum Oil Dehydration System to Remove Dissolved Water breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Technical Parameters:
| Item | Unit | TY-10 | TY-20 | TY-30 | TY-50 | TY-100 | TY-150 | TY-200 | TY-300 | |
| Flow rate | Liters/hour | 600 | 1200 | 1800 | 3000 | 6000 | 9000 | 12000 | 24000 | |
| Working Vacuum Degree | MPa | -0.06 ~-0.095 | ||||||||
| Working Pressure | MPa | ≤ 0.3 | ||||||||
| Temperature Range | ºC | 20 ~80 | ||||||||
| Water content | PPM | ≤50 | ||||||||
| Impurity content | μm | ≤5 | ||||||||
| Gas content | % | ≤0.1 % | ||||||||
| Cleanness | NAS | ≤6 grade (NAS1638) | ||||||||
| Demulsification value | min | ≤15 (GB/F 7305) | ||||||||
| Power Supply | 3 Phase, 50 Hz, 380V (or as per requirement) | |||||||||
| Heating power | kW | 12 | 15 | 18 | 24 | 45 | 60 | 72 | 84 | |
| Total power | kW | 14 | 17 | 20 | 27 | 48 | 66 | 81 | 97 | |
| Inlet/outlet caliber | mm | 25 | 25 | 25 | 32 | 42 | 50 | 50 | 60 | |
| Weight | kg | 400 | 450 | 500 | 600 | 700 | 900 | 1050 | 1550 | |
| Dimension | Length | mm | 1280 | 1350 | 1350 | 1400 | 1500 | 1500 | 1600 | 1800 |
| Width | mm | 750 | 900 | 950 | 950 | 1000 | 1200 | 1350 | 1400 | |
| Height | mm | 1450 | 1450 | 1500 | 1600 | 1650 | 1800 | 1800 | 1850 | |
We practiced in this industry during all these years, and have rich on-site experiences too. Any on-site cases, please contact us for a solution.
For detailed product specifications, please leave us your email or mobile no. to send you the catalog. Thank you.